[. . . ] To obtain the best performance from this product, please read this manual carefully. CD-ES600 Mini Component System consisting of CD-ES600 (main unit) and CP-ES600 (speaker system). MINI COMPONENT SYSTEM MODEL CD-ES66 Mini Component System consisting of CD-ES66 (main unit) and CP-ES66 (speaker system). CD-ES600 CD-ES66 OPERATION MANUAL Accessories Please confirm that the following accessories are included. Remote control 1 AM loop antenna 1 (RRMCG0390AWSA) (QANTL0005AWZZ) Note: Only the above accessories are included. FM antenna 1 (92LFANT1746A) CD-ES600 CD-ES66 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Programmed play You can choose up to 32 selections for playback in the order you like. 1 While in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. To clear the programmed selections: Press the CLEAR/DIMMER button on the remote control while the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Adding tracks to the program: If a program has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original program. To check which tracks are programmed: While the unit is stopped in the programmed play mode, press the or button. Notes: " When a disc with programmed tracks is ejected, the program is automatically canceled. " Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared. " During programmed play, the DIRECT PLAY buttons will not work. 2 Press one of the 1 - 5 buttons to select the desired disc. CD Playback Selected disc number 3 Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button. 4 5 Press the MEMORY/SET (MEMORY) button to save the track number. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR/DIMMER button. The total number of memory will appear. 6 7 20 Press the / button to start playback. Listening to the radio !Tuning CD-ES600 CD-ES66 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: " When radio interference occurs, auto scan tuning may stop automatically at that point. To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. " If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. FM stereo mode indicator Auto power on function: When you press any of the following buttons, the unit turns on. " TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. [. . . ] There may be some deviations from these values in individual units. CD-ES600 CD-ES66 !General Power source Power consumption Dimensions AC 120 V, 60 Hz 108 W Width: 10-1/4" (260 mm) Height: 13" (330 mm) Depth: 12-7/8" (326 mm) 17. 2 lbs. Cassette deck Frequency response Signal/noise ratio Wow and flutter 50 - 14, 000 Hz (normal tape) 55 dB (TAPE-1 playback) 50 dB (TAPE-2 recording/playback) 0. 3 % (WRMS) Weight !Amplifier Output power 120 watts minimum RMS per channel into 6 ohms from 100 Hz to 20 kHz, 10% total harmonic distortion Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Video output: 1Vp-p Game/Auxiliary (audio signal): 500 mV/47 k ohms Game/Video: 1Vp-p ! [. . . ]